Body
Summary
How to use the audio-visual technology in the PK 200 classroom
Information
The Parks 200 classroom is equipped with two large displays in the front that are mirrored to two large displays in the rear, a camera, ceiling microphone and speakers, and a PC with touch screen. A Crestron touch panel controls the audio-visual components.
Start the System
On the Crestron panel, tap Begin.
Present
Input Selection
Choose from the following options:
- PC (recommended)
- HDMI
- An HDMI cable is available on the podium. Keep in mind that using a laptop connection will not allow for the room camera or microphone to be used, as they are only connected to the PC.
Volume Control
The Volume Control at the top of the panel will control the level of audio coming from the ceiling speakers. The Room Mute icon along the bottom will mute the speakers.
The microphone is in the ceiling. The volume is automatically set. They may be muted by tapping the Mic Mute button. The ceiling microphones also have a visual status indicator on them (green light: on; red light: muted).
Display Power
The front and rear displays can be powered on or off separately.
Camera Control
Zoom and Pan/Tilt controls are available to control the camera position. Up to four Presets can be set. Press and hold on any of the presets to set a new position.
Shutdown
When finished, tap the Power Off in the upper right corner, then choose Yes, shutdown to shut down the system.